Directions

READ BEFORE USING:

1. Dilute before using. Do not use on painted surfaces or wooden floors. Use cautiously for stripping linoleum, or rubber tile as stripper may cause bleaching, softening or bleeding.
2. Wipe up any spills or splashing from baseboards or painted surfaces immediately.
3. Dilute as instructed below. Stronger dilutions will not increase efficacy.

DIRECTIONS:

1. Dilute with cold water as follows: 1 part stripper to 4 parts water.
2. Apply liberally to floor covering 100 square feet (9 m2 ) at a time. Be sure to leave surface VERY wet!
3. Allow to remain on floor 5 to 10 minutes. Agitate for 100% removal of old floor finish.
4. Pick up solution using a wet vac or auto scrubber. If any finish remains (around baseboards), reapply stripping solution and agitate as necessary.
5. Rinse floor thoroughly. Allow floor to dry.
6. Apply Green Finish(8201FF).

NOTE: For stripping and maintaining asbestos containing tile, follow OSHA guidelines or EPA guidelines.

See label directions and SDS for complete usage and safety instructions.