indeed FaceBook X
Generic filters
Exact matches only

X-Coat™ 22

High Solids Extreme Performance Coating

  • Combines deep gloss, high durability and ease-of-use into one product.
  • High solids formula offers greater protection with fewer coats.
  • Non-yellowing, low maintenance formula offers excellent black mark and scuff resistance

Product Code: 265FF

Sizes Available

High Solids Extreme Performance Coating

Combines deep gloss, high durability and ease-of-use into one product.


265FF


High Solids Extreme Performance Coating

Combines deep gloss, high durability and ease-of-use into one product.


265FF


Additional Features

  • Perfect for classrooms, patient rooms, offices and retail establishments.
  • Ideal for limited maintenance programs, yet responds to daily burnishing, if desired.
  • Fast drying – 30 minutes under normal conditions.
  • Use on vinyl, rubber, linoleum, terrazzo, quarry tile and sealed concrete floors.
  • Slip-resistant – UL Classified.

Properties

  • Type – Acrylic Emulsion
  • Form – Opaque Liquid
  • Odor – Bland
  • Color – Milky White
  • Weight per Gallon – 8.61 Lbs.
  • pH – 8.0 – 8.5
  • Coverage – Up to 3,000 Sq. Ft. Per Gallon (75 m2 per liter)
  • Storage Stability – Min. 1 Year
  • Freeze/Thaw – Passes 3 Cycles
  • V.O.C. Content – < 230 gm/l

* Properties are typical and subject to usual manufacturing tolerances.

Directions

Application:

  1. Strip floors to remove old waxes, sealers and finishes.
  2. Rinse thoroughly and let dry.
  3. With clean rayon mop apply thin, even coats of X-Coat 22.
  4. Under normal conditions, allow to dry for 30 minutes between coats.
  5. For best results, apply a maximum of 4 coats in 24 hours.

Maintenance:

  1. Daily: Sweep or dust mop as necessary to remove gritty soil.
  2. Dirty Floors: Clean with 2-4 oz. of neutral floor cleaner per gallon (16-32 ml per liter) of water. Rinse and let dry.
  3. Traffic Area: Clean with 2-4 oz. of neutral floor cleaner per gallon (16-32 ml per liter) of water. Rinse and let dry. Apply additional thin coats of floor finish to traffic lanes as needed.
  4. Buffing: If desired, periodic burnishing with blended hair pads will enhance appearance.
  5. Periodic Complete Maintenance: Complete Maintenance: Ordinarily, stripping is not required more than (1) or (2) times per year. Use up to 32 oz. of our stripper per gallon (256 ml per liter) of water.

Read label before use. Keep out of the reach of children. If medical advice is needed, have product container or label at hand.

See label directions and SDS for complete usage and safety instructions.

Application

  • X-Coat 22 is very easy to apply with a standard finish mop and dries perfectly clear.
  • For best results in high traffic locations (such as supermarkets) and entranceways, apply four coats the first night, then follow-up a few days later with four more coats. This gives you the desired film thickness from which to properly maintain your floor.

Packaging

Product Code Sizes UPC Code Pack Size (inches) Cube (ft) Pack Wt. (lbs) Full Pallet
265FF-D55 55 Gallon
Drum
783366265009 24 x 34 10.41 495.53 4
265FF-5GP 5 Gallon
Pail
783366265053 12 x 14 1.17 46.23 36
265FF-GR4 4 x One
Gallon
783366265046 13 x 13.5 x 12.5 1.27 36.56 36
  • Product Code: 265FF-D55
  • Sizes: 55 Gallon Drum
  • UPC Code: 783366265009
  • Pack Size (inches): 24 x 34
  • Cube (ft): 10.41
  • Pack Wt. (lbs): 495.53
  • Full Pallet: 4
  • Product Code: 265FF-5GP
  • Sizes: 5 Gallon Pail
  • UPC Code: 783366265053
  • Pack Size (inches): 12 x 14
  • Cube (ft): 1.17
  • Pack Wt. (lbs): 46.23
  • Full Pallet: 36
  • Product Code: 265FF-GR4
  • Sizes: 4 x One Gallon
  • UPC Code: 783366265046
  • Pack Size (inches): 13 x 13.5 x 12.5
  • Cube (ft): 1.27
  • Pack Wt. (lbs): 36.56
  • Full Pallet: 36

Pads

Propane Battery Electric (1000+ rpm)
3M Natural Blend White Natural Blend White Tan Burnish
Americo Combo Luster Lite Beige
ETC Gorilla Lite Aqua PLUS Aqua PLUS
Glit 100-D Neutral
Polythermal
100-D Neutral
Polythermal
100-D Neutral
Polythermal
Microtron Jackeroo Lite Beige Beige
Norton Grizzly Bear “Lite” Thermal Thermal

* These are generalized classifications based on market research. Terms and definitions may be different from manufacturer to manufacturer; however, the above information will help to determine pad compatibility with various floor machines and Essential finishes on the market.