indeed FaceBook X
Generic filters
Exact matches only

X-Coat™ Nano

Extreme Performance Coating

  • Incorporates our patented nano-zinc technology for more thorough and denser cross-linking of finish.
  • Nano-zinc cross-linking provides superior:
    • Lay-down gloss
    • Gloss build
    • Durability
    • Mark resistance
    • Soil resistance
    • Dry and recoat times
  • Ammonia-free for dramatically reduced odor.

Product Code: 88FF

Sizes Available

Product Videos

Extreme Performance Coating

Incorporates our patented nano-zinc technology for more thorough and denser cross-linking of finish.


88FF

Extreme Performance Coating

Incorporates our patented nano-zinc technology for more thorough and denser cross-linking of finish.


88FF

Additional Features

  • Ideal for limited maintenance programs, yet responds to daily burnishing, if desired.
  • Low-emissions formula – meets California’s new 1% VOC Regulation.
  • Coverage – up to 3,000 square feet.
  • Fast-drying – 15-20 minutes under normal conditions (50% humidity and 70°F) between coats.
  • Slip-resistant – UL Classified.

Properties

  • Type – Acrylic Emulsion
  • Form – Opaque Liquid
  • Odor – Bland
  • Color – Milky White
  • Weight per Gallon – 8.57 Lbs.
  • pH – 8.0 – 8.5
  • Storage Stability – Min. 1 Year
  • Freeze/Thaw – Protect From Freezing
  • V.O.C. Content – 0.59%

* Properties are typical and subject to usual manufacturing tolerances.

Directions

Application:

  1. Strip floors using Xlerate™ Stripper(2917FX) following all package instructions to remove old waxes, sealers and finishes.
  2. Rinse thoroughly and let dry.
  3. With clean equipment apply thin, even coats of finish.
  4. Under normal conditions, allow to dry for 15 to 20 minutes between coats.
  5. For best results, apply a maximum of 4 coats in 24 hours.

NOTE: For stripping and maintaining asbestos containing tile, follow OSHA or EPA guidelines.
COVERAGE: One gallon covers up to 3,000 square feet (1 liter covers 75 m2).

Maintenance:

  1. Daily: Sweep or dust mop as necessary to remove gritty soil.
  2. Dirty Floors: Clean with Neutral Cleaner Plus (2746FC) or Blue Concentrate (2085FC). Follow package directions for proper dilution rates. Rinse and let dry.
  3. Traffic Area: Clean with Blue Concentrate. Follow package directions for best results. Rinse and let dry. Apply additional thin coats of floor finish to traffic lanes as needed.
  4. Buffing: If desired, periodic burnishing with blended hair pads will enhance appearance.
  5. Periodic Complete Maintenance: When stripping is required, use Xlerate(2917FX) following label directions for best results.

Read label before use. Keep out of the reach of children. If medical advice is needed, have product container or label at hand.

See label directions and SDS for complete usage and safety instructions.­­

Application

  • X-Coat Nano is very easy to apply with a standard finish mop and dries perfectly clear.
  • For best results, apply four coats the first night, then follow-up a few days later with four more coats. This gives you the desired film thickness from which to properly maintain your floor.

Packaging

Product Code Sizes UPC Code Pack Size (inches) Cube (ft) Pack Wt. (lbs) Full Pallet
88FF-D55 55 Gallon
Drum
783366880003 24 x 34 10.41 495.53 4
88FF-5GP 5 Gallon
Pail
783366880058 12 x 14 1.17 46.23 36
88FF-GR4 4 x One
Gallon
783366880041 13 x 13.5 x 12.5 1.27 36.56 36
  • Product Code: 88FF-D55
  • Sizes: 55 Gallon Drum
  • UPC Code: 783366880003
  • Pack Size (inches): 24 x 34
  • Cube (ft): 10.41
  • Pack Wt. (lbs): 495.53
  • Full Pallet: 4
  • Product Code: 88FF-5GP
  • Sizes: 5 Gallon Pail
  • UPC Code: 783366880058
  • Pack Size (inches): 12 x 14
  • Cube (ft): 1.17
  • Pack Wt. (lbs): 46.23
  • Full Pallet: 36
  • Product Code: 88FF-GR4
  • Sizes: 4 x One Gallon
  • UPC Code: 783366880041
  • Pack Size (inches): 13 x 13.5 x 12.5
  • Cube (ft): 1.27
  • Pack Wt. (lbs): 36.56
  • Full Pallet: 36

Pads

Propane Battery Electric (1000+ rpm)
3M Natural Blend White Natural Blend White Tan Burnish
Americo Combo Luster Lite Beige
ETC Gorilla Lite Aqua PLUS Aqua PLUS
Glit 100-D Neutral Polythermal 100-D Neutral Polythermal 100-D Neutral Polythermal
Microtron Jackeroo Lite Beige Beige
Norton Grizzly Bear “Lite” Thermal Thermal

* These are generalized classifications based on market research. Terms and definitions may be different from manufacturer to manufacturer; however, the above information will help to determine pad compatibility with various floor machines and Essential finishes on the market.