Directions

APPLICATION:

1. Strip floors to remove old waxes, sealers and finishes.
2. Rinse thoroughly and let dry. 3. With clean equipment apply thin, even coats of finish.
3. Under normal conditions, allow to dry for 30 to 40 minutes between coats.
4. For best results, apply a maximum of 3 coats in 24 hours.

NOTE: For stripping and maintaining asbestos containing tile, follow OSHA or EPA guidelines.

COVERAGE: One gallon covers up to 3,000 square feet (1 liter covers 75 m2).

MAINTENANCE:

1. Daily: Sweep or dust mop as necessary to remove gritty soil.
2. Dirty Floors: Clean with 2-4 oz. of Nu-Tral Cleaner (507FC) per gallon (16-32 ml per liter) of water. Rinse and let dry.
3. Traffic Area: Clean with 2-4 oz. of Nu-Tral Cleaner (507FC) per gallon (16-32 ml per liter) of water. Rinse and let dry. Apply additional thin coats of floor finish to traffic lanes as needed.
4. Buffing: If desired, periodic burnishing with semi-soft blended pads will enhance appearance.
5. Periodic Complete Maintenance: Ordinarily, stripping is not required more than (1) or (2) times per year. Use up to 32 ozs. of our stripper per gallon (256 ml per liter) of water.

Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand.

See label directions and SDS for complete usage and safety instructions.