indeed FaceBook X
Generic filters
Exact matches only

X-Coat™ Nano 22

High Solids Extreme Performance Coating

  • Incorporates our new, patented nano-zinc technology for enhanced black mark and scuff resistance, faster dry time and lower odor.
  • Low emission formula – meets new 1% VOC Regulation.
  • Combines deep gloss, high durability and ease-of-use into one product.

Product Code: 86FF

Sizes Available

High Solids Extreme Performance Coating

Incorporates our nano-zinc technology for more thorough and denser cross-linking of finish. Low emission formula – meets new 1% VOC Regulation.


86FF

High Solids Extreme Performance Coating

Incorporates our nano-zinc technology for more thorough and denser cross-linking of finish. Low emission formula – meets new 1% VOC Regulation.


86FF

Additional Features

  • High solids formula offers greater protection with fewer coats.
  • Non-yellowing, low maintenance formula offers excellent black mark and scuff resistance
  • Perfect for classrooms, patient rooms, offices and retail establishments.
  • Ideal for limited maintenance programs, yet responds to daily burnishing, if desired.
  • Fast drying – 30 minutes under normal conditions.
  • Use on vinyl, rubber, linoleum, terrazzo, quarry tile and sealed concrete floors.
  • Slip-resistant – UL Classified.

Properties

  • Type – Acrylic Emulsion
  • Form – Opaque Liquid
  • Odor – Bland
  • Color – Milky White
  • Weight per Gallon – 8.65 Lbs.
  • pH – 7.0 – 8.0
  • Storage Stability – Min. 1 Year
  • Freeze/ThawProtect From Freezing
  • V.O.C. Content – 0.8%

* Properties are typical and subject to usual manufacturing tolerances.

Directions

Application:

  1. Strip floors using Xlerate™ Stripper (2917FX) following all package instructions to remove old waxes, sealers and finishes.
  2. Rinse thoroughly and let dry.
  3. With clean equipment apply thin, even coats of finish.
  4. Under normal conditions, allow to dry for 15 to 20 minutes between coats.
  5. For best results, apply a maximum of 4 coats in 24 hours.

Maintenance:

  1. Daily: Sweep or dust mop as necessary to remove gritty soil.
  2. Dirty Floors: Clean with Neutral Cleaner Plus (2746FC) or Blue Concentrate (2085FC). Follow package directions for proper dilution rates. Rinse and let dry.
  3. Traffic Area: Clean with Blue Concentrate. Follow package directions for best results. Rinse and let dry. Apply additional thin coats of floor finish to traffic lanes as needed.
  4. Buffing: If desired, periodic burnishing with blended hair pads will enhance appearance.
  5. Periodic Complete Maintenance: When stripping is required, use Xlerate (2917FX) following label directions for best results.

Read label before use. Keep out of the reach of children. If medical advice is needed, have product container or label at hand.

See label directions and SDS for complete usage and safety instructions.

Application

  • X-Coat Nano 22 is very easy to apply with a standard finish mop and dries perfectly clear.
  • For best results, apply four coats the first night, then follow-up a few days later with four more coats. This gives you the desired film thickness from which to properly maintain your floor.

Packaging

Product Code Sizes UPC Code Pack Size (inches) Cube (ft) Pack Wt. (lbs) Full Pallet
86FF-D55 55 Gallon
Drum
783366860005 24 x 34 10.41 495.53 4
86FF-5GP 5 Gallon
Pail
783366860050 12 x 14 1.17 46.23 36
86FF-GR4 4 x One
Gallon
783366860043 13 x 13.5 x 12.5 1.27 36.56 36
  • Product Code: 86FF-D55
  • Sizes: 55 Gallon Drum
  • UPC Code: 783366860005
  • Pack Size (inches): 24 x 34
  • Cube (ft): 10.41
  • Pack Wt. (lbs): 495.53
  • Full Pallet: 4
  • Product Code: 86FF-5GP
  • Sizes: 5 Gallon Pail
  • UPC Code: 783366860050
  • Pack Size (inches): 12 x 14
  • Cube (ft): 1.17
  • Pack Wt. (lbs): 46.23
  • Full Pallet: 36
  • Product Code: 86FF-GR4
  • Sizes: 4 x One Gallon
  • UPC Code: 783366860043
  • Pack Size (inches): 13 x 13.5 x 12.5
  • Cube (ft): 1.27
  • Pack Wt. (lbs): 36.56
  • Full Pallet: 36

Pads

Propane Battery Electric (1000+ rpm)
3M Natural Blend White Natural Blend White Tan Burnish
Americo Combo Luster Lite Beige
ETC Gorilla Lite Aqua Plus Aqua Plus
Glit 100-D Neutral Polythermal 100-D Neutral Polythermal 100-D Neutral Polythermal
Microtron Jackeroo Lite Beige Beige
Norton Grizzly Bear “Lite” Thermal Thermal

* These are generalized classifications based on market research. Terms and definitions may be different from manufacturer to manufacturer; however, the above information will help to determine pad compatibility with various floor machines and Essential finishes on the market.